lb logo grey white.jpg (13791 bytes)

 

ProStar Logo

ProStar  Flatbed/Construction Trailers

Deckover Trailer
ProStar Deckover Trailerr

ProStar’s Deckover Series Trailers are designed and built with attention to detail. Safety and long service life are driving factors with every ProStar trailer.

Available with wood or diamond tread-plate decking, and a gentle five foot dovetail that allows low to the ground access using the spring assisted fold up ramp system.

Available in 10,000 lb through 25,000 lb models, the length ranges from 15-30'. ProStar deckovers use twin 12”– 16# I-beams for strength under the length of the bed.

ProStar

Standard Features

• 16” avg spacing between crossmembers
• 5’ dovetail
• 12” bump rail
• Electric brakes on all axles
• Breakaway unit
• Gusset reinforced joints
• Slipper springs
• 10,000lb drop leg jack
• Stake pockets
• Primer and 2 coats hardened automotive finish
• Rubber underbody coating
• All L.E.D. lights
• White oak deck
• Durable safety chains
• Standard colors: Gloss Black, Fleet White, Cat Yellow, International Red, Silver Metallic
Decks are available in Diamond plate, white oak or treated lumber. We comply with all state and federal regulations. Ramps are removable with storage racks under the rear of the trailer for easy access.

ProStar  ProStar

Quality welding on all joints. All lighting and reflective tape is USDOT approved. Fenders are braced in front and behind. Trailer is rubber coated underneath. Stake pockets for easy tie down or wooden sides.

Available Options

  • Aluminum diamond plate tool chest
  • White oak deck
  • Diamond plate deck
  • Treated lumber deck
  • D-rings
  • Custom colors
  • Stake Pockets / Rub rail
  • Dual landing gear
  • Premium wheels
  • Spare tire and carrier

    • Available in 10k-25k models – deck widths are approximately 101” - dovetails are a standard 14 degree angle and 5' in length.

    Equipment Trailer
    ProStar

    Our decks are available in white oak or treated lumber and comply with all NHTSA and DOT regulations. Ramps are fold up, heavy steel & spring assisted.
    Standard Features:
    		  
    • Fully MIG pulse welded with weld penetration checking
    • 3/16ths web thickness on steel frame
    • Adjustable couplers used for highest quality assurance
    • Diamond Plate teardrop fenders for strength and lifelong durability
    • High quality cambered brake axles
    • All waterproof epoxy LED lights used
    • All wiring in conduit or shielded wiring and all connectors are silicone filled to protect from corrosion.
    • Stake Pockets are standard
    • All trailers are primer coated then two coats automotive paint coat

     

    Quality welding and reinforced joints. All lighting and reflective tape is per regulation.. Trailer is rubber coated underneath. Deck is fastened with coated deck screws for long life.

     ProStar

    Available Options:

    • Diamond Deck
    • Winch Mount
    • Chain Tray
    • Tool Chest
    • Spare tire/Mount
    • 12k Dropleg Jack
    • Slipper springs
    • Treadplate Fenders

    • Standard colors: Gloss Black, White, New Cat Yellow, International Red, Metallic Grey

    Power Tilt Equipment Trailer
    ProStar Power Tilt

    ProStar's Power Tilt Equipment trailer offers quality hydraulic components and an attention to detail that puts a dependable, ready-to-use system in your hands.

    This trailer comes in two models. The Full Tilt trailer has a 16' tilting deck. The second model has a 4' stationary deck and a 16' tilt section. The stationary deck provides an area for your equipment to remain on the trailer while operating the tilt section. 

    Optional ramps or ramp gate is available. Locking clamps are stationed on each side to securely clamp down deck during transportation.

    Angled tail end provides flush contact with the ground, minimizing the bump on loading.

     
    ProStar

    ProStar
    Standard Features:
    • Twin Cylinder hydraulic system
    • Lockable Weather Resistant Toolbox
    • Wiring in conduit supports and pass-through hole punched frame
    • Tie Down points strategically placed
    • One coat primer and two coats hardened paint
    • A-frame tongue - 5-or 6" channel

    Available Options:

    • D-rings
    • Spare Tire and Mount
    • Stationary Deck
    • Color Choice

    Type Axle Rating Mesh/Wood Options
    7x16 Power Tilt 5200-7000# Wood/Diamond Ramp Gate/Spare/Chest
    7x16+4 Power Tilt 5200-7000# Wood/Diamond Ramp Gate/Spare/Chest

    Skid Steer Trailer
    ProStar Skid Steer 

    These Heavy Duty equipment trailers are available in 10k and 12k. The bed has a width of up to 80" between the fenders. The fold-up ramps are made a 3" channel. This trailer comes standard with drop axles, providing the lowest deck height in the industry.

    The deck is grade 1 treated wood. This model has stake pockets, rub rail, and a 7k drop-leg jack standard, load-rated radial tires, slipper springs, and LED lights standard.

    ProStar  
    Standard Features:
    • 7k sidewind dropleg hack
    • 16" floor centers
    • Drop Axles
    • Tandem 6k lb axle(s) w/spring suspension
    • Standard with brakes on all axles
    • 2 5/16 ad, coupler or pintle available
    • Wiring in conduit supports and pass-through hole punched frame
    • 5/6" channel A-frame tongue
    • Fold up channel ramps
    • Diamond plate fenders with backing
    • Stake pockets and D-rings

    Available Options:

    • Winch Mount
    • Chain Tray
    •Tool Chest

    • Spare Tire and Mount
    • Color Choice

     

    Home

    		 Horse Trailers Used Trailers Motorcycle Trailers
    Car Haulers Cargo Trailers Utility/ATV Trailers Flatbed/Construction Trailers
    Parts & Service Horse/Dog Accessories Farm Equipment Stock Trailers
    Contact Us Directions Financing About Lazy B

    ~ Models, specifications and/or pricing subject to change without notice ~